When the Left and Right Airplus earpod cut out, that is because the earpods have been independently paired to the device.
The right steps to pair the Airplus earpods to a device is to:
Take the Right earpod, which is the master and put it in pairing mode
Once the device is in pairing mode, activate Bluetooth pairing on your phone, tablet, or computer
once the Airplus earpod is paired to your phone, tablet, or computer then turn on the left Airplus earpod.
The left Airplus earpod automatically pair to the right Airplus earpod.
______________________________________________________________________________________
When the Airplus earpods are turned on, the Left and Right earpods will automatically connect to each other and the voice prompt will respond with “Connected”. The indicator lights of the right earpod will flash alternately in blue and red. While the indicator light of the left earpod will flash slowly.
Enable the Bluetooth Pairing mode on your Phone or Tablet. Tap on “Airplus” to connect to the Airplus Earpods. NOTE: IF you see 2 Airplus entries in available devices then the earpods are not paired together corrected. Power off both devices by holding the Multifunction button down for 3 seconds to power them off (See #6) and go back to Step 3 to power on the Earpods again.
When Bluetooth is turned off, the Airplus earpods will voice prompt “DISCONNECTED” and will power off automatically after 5 minutes.
When the Airplus earpods are powered on, they will attempt to connect to the last phone or tablet connected. If you wish to use your Airplus earpods with a new device, please repeat the steps in this section.
Both the Left and Right earpod are well-paired before it leaves the factory. The Right earpod is the master headset by default. You may pair the right earpod with your phones and tablets directly and it will act the same as if you paired both earpods . If the earpods are accidentally reset, please pair them manually per the following steps
___________________________________________________________________________________
It doesn't show up on my Bluetooth page:
Press and hold the multifunction button key for 6 seconds on both the left and the right earpods at the same time and release when red and blue light flash alternatively and the voice prompt responds “PAIRING”
They will be paired and connected automatically. Once this is completed, the voice prompt responds “CONNECTED”
When paired successfully, the indicator lights of the Right earpod will flash alternatively in Red and Blue, while the Blue indicator light if the Left earpod will flash slowly.
Enable your Phone or Tablet’s Bluetooth Pairing function and search for Airplus to pair and connect.
Another way:
Press and hold the multifunction button key for 6 seconds on both the left and the right earpods at the same time and release when red and blue light flash alternatively and the voice prompt responds “PAIRING”
They will be paired and connected automatically. Once this is completed, the voice prompt responds “CONNECTED”
When paired successfully, the indicator lights of the Right earpod will flash alternatively in Red and Blue, while the Blue indicator light if the Left earpod will flash slowly.
Enable your Phone or Tablet’s Bluetooth Pairing function and search for Airplus to pair and connect.
Comments
0 comments
Please sign in to leave a comment.